TextBin - Online Text and Code Sharing

New Paste Browse

Loader:raw Filesys:raw Dev:flash0.runtime1 File: Options:(null)
Loading: .... 3182742 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.6.72 (kali@kali) (arm-openwrt-linux-muslgnueabi-5
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
[    0.000000] OF: fdt: Machine model: Meru AP822i
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during .
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   HighMem  [mem 0x0000000008000000-0x000000009fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   node   0: [mem 0x0000000088000000-0x000000009fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000009fffffff]
[    0.000000] percpu: Embedded 12 pages/cpu s17556 r8192 d23404 u49152
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, l)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, lin)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130784
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 508316K/524288K available (7164K kernel code, 594K rwdat)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x0
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000002] sched_clock: 64 bits at 500MHz, resolution 2ns, wraps every 4398s
[    0.000022] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycls
[    0.000045] Switching to timer-based delay loop, resolution 2ns
[    0.000346] Calibrating delay loop (skipped), value calculated using timer f)
[    0.000359] CPU: Testing write buffer coherency: ok
[    0.000384] CPU0: Spectre v2: using BPIALL workaround
[    0.000391] pid_max: default: 32768 minimum: 301
[    0.005972] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, line)
[    0.005985] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,)
[    0.011182] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.012100] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adj.
[    0.012257] Setting up static identity map for 0x100000 - 0x10003c
[    0.012421] rcu: Hierarchical SRCU implementation.
[    0.012427] rcu:     Max phase no-delay instances is 1000.
[    0.012813] smp: Bringing up secondary CPUs ...
[    0.013491] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.013510] CPU1: Spectre v2: using BPIALL workaround
[    0.013605] smp: Brought up 1 node, 2 CPUs
[    0.013615] SMP: Total of 2 processors activated (2000.00 BogoMIPS).
[    0.013623] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primar)
[    0.013627] CPU: This may indicate a broken bootloader or firmware.
[    0.017227] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[    0.017252] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.020240] pinctrl core: initialized pinctrl subsystem
[    0.022063] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.022754] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.023555] thermal_sys: Registered thermal governor 'step_wise'
[    0.033926] clocksource: Switched to clocksource arm_global_timer
[    0.040355] NET: Registered PF_INET protocol family
[    0.040542] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linea)
[    0.041069] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096)
[    0.041095] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,)
[    0.041108] TCP established hash table entries: 1024 (order: 0, 4096 bytes, )
[    0.041123] TCP bind hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.041152] TCP: Hash tables configured (established 1024 bind 1024)
[    0.041579] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linea)
[    0.041811] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.041840] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.042304] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.042344] PCI: CLS 0 bytes, default 64
[    0.043654] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.045161] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.045179] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI.
[    0.046435] bounce: pool size: 64 pages
[    0.048386] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.049183] printk: console [ttyS0] disabled
[    0.049442] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 26, base_baud =0
[    0.049492] printk: console [ttyS0] enabled
[    0.598174] bcm2835-rng 18004000.rng: hwrng registered
[    0.605112] nand: No NAND device found
[    0.609348] bcm_iproc 18029200.spi: using bspi-mspi mode
[    0.616806] spi-nor spi0.0: mx66l51235f (65536 Kbytes)
[    0.622063] 11 fixed-partitions partitions found on MTD device spi0.0
[    0.628575] Creating 11 MTD partitions on "spi0.0":
[    0.633473] 0x000000000000-0x000000080000 : "bootloader"
[    0.639369] 0x000000080000-0x0000000c0000 : "boot_env"
[    0.645215] 0x0000000c0000-0x0000001c0000 : "logk0"
[    0.650640] 0x0000001c0000-0x0000002c0000 : "logk1"
[    0.656069] 0x0000002c0000-0x000000340000 : "user0"
[    0.661399] 0x000000340000-0x00000064d7e4 : "kernel"
[    0.666471] mtd: partition "kernel" doesn't end on an erase/write block -- fy
[    0.675675] 0x00000064d7e4-0x000000a4d7e4 : "rootfs"
[    0.680683] mtd: partition "rootfs" doesn't start on an erase/write block boy
[    0.690763] mtd: setting mtd6 (rootfs) as root device
[    0.695947] 1 squashfs-split partitions found on MTD device rootfs
[    0.702157] 0x0000009c0000-0x000000a40000 : "rootfs_data"
[    0.708486] 0x000001f80000-0x000001fc0000 : "nvram1"
[    0.714262] 0x000001fc0000-0x000002000000 : "nvram"
[    0.720029] 0x000002000000-0x000003c00000 : "runtime0"
[    0.726247] 0x000003c00000-0x000004000000 : "config0"
[    0.739272] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered
[    0.747216] b53-srab-switch 18007000.ethernet-switch: found switch: BCM530125
[    0.755789] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[    0.762218] bcma-host-soc 18000000.axi: bus0: Found chip with id 53010, rev 0
[    0.771287] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manu)
[    0.781957] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (ma)
[    0.792765] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF)
[    0.802824] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf )
[    0.813305] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf )
[    0.823828] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf )
[    0.834324] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf )
[    0.844770] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manu)
[    0.855370] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manu)
[    0.865975] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manu)
[    0.876610] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 c)
[    0.888726] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf )
[    0.899178] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf )
[    0.909640] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x)
[    0.919949] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4B)
[    0.930056] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 J)
[    0.941461] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR)
[    0.954254] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4B)
[    0.964402] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash cont)
[    0.976087] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash contr)
[    0.987545] bcma-host-soc 18000000.axi: bus0: Flash type not supported
[    0.994240] bcma-host-soc 18000000.axi: bus0: Using fallback SPROM failed (e)
[    1.001834] bcma-host-soc 18000000.axi: bus0: No SPROM available
[    1.005116] random: crng init done
[    1.008149] bgmac_bcma bcma0:3: Found PHY addr: 0
[    1.016046] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
[    1.022346] bgmac_bcma bcma0:3: Using random MAC: 86:be:f4:c5:26:1d
[    1.029592] b53-srab-switch b53-srab-switch: invalid resource (null)
[    1.036054] b53-srab-switch: probe of b53-srab-switch failed with error -22
[    1.043669] bgmac_bcma bcma0:4: Found PHY addr: 0
[    1.048468] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
[    1.054781] bgmac_bcma bcma0:4: Using random MAC: 26:cc:c1:f6:3f:f6
[    1.062457] bgmac_bcma bcma0:5: Found PHY addr: 0
[    1.067270] bgmac_bcma bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
[    1.073579] bgmac_bcma bcma0:5: Using random MAC: 12:e4:a3:0d:66:cf
[    1.081330] bgmac_bcma bcma0:6: Unsupported core_unit 3
[    1.086658] bgmac_bcma: probe of bcma0:6 failed with error -524
[    1.092764] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ra:
[    1.100339] pcie_iproc_bcma bcma0:7:   No bus range found for /axi@18000000/]
[    1.109973] OF: /axi@18000000/pcie@12000: Missing device_type
[    1.115753] pcie_iproc_bcma bcma0:7: non-prefetchable memory resource requird
[    1.233927] pcie_iproc_bcma bcma0:7: link: UP
[    1.238527] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
[    1.244843] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.250350] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
[    1.257300] pci 0000:00:00.0: [14e4:8012] type 01 class 0x060400
[    1.263330] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 s
[    1.273078] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    1.280117] PCI: bus0: Fast back to back transfers disabled
[    1.285751] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg
[    1.293952] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000
[    1.299994] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 s
[    1.309716] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[    1.316553] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x001fffff 64bit]
[    1.323467] pci 0000:01:00.0: supports D1 D2
[    1.327757] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.334630] PCI: bus1: Fast back to back transfers disabled
[    1.340222] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.346910] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x082fffff]
[    1.353732] pci 0000:01:00.0: BAR 2: assigned [mem 0x08000000-0x081fffff 64b]
[    1.361095] pci 0000:01:00.0: BAR 0: assigned [mem 0x08200000-0x08207fff 64b]
[    1.368452] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.373434] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x082fffff]
[    1.380251] pci_bus 0000:00: resource 4 [mem 0x08000000-0x0fffffff]
[    1.386549] pci_bus 0000:01: resource 1 [mem 0x08000000-0x082fffff]
[    1.392880] pci 0000:00:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s )
[    1.401252] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ra:
[    1.408805] pcie_iproc_bcma bcma0:8:   No bus range found for /axi@18000000/]
[    1.418443] pcie_iproc_bcma bcma0:8: non-prefetchable memory resource requird
[    1.543926] pcie_iproc_bcma bcma0:8: link: UP
[    1.548427] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
[    1.554735] pci_bus 0001:00: root bus resource [bus 00-ff]
[    1.560238] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
[    1.567184] pci 0001:00:00.0: [14e4:8012] type 01 class 0x060400
[    1.573218] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 s
[    1.582967] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    1.590016] PCI: bus0: Fast back to back transfers disabled
[    1.595649] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reg
[    1.603818] pci 0001:01:00.0: [14e4:43a2] type 00 class 0x028000
[    1.609891] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 s
[    1.619610] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[    1.626441] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x001fffff 64bit]
[    1.633365] pci 0001:01:00.0: supports D1 D2
[    1.637664] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.644536] PCI: bus1: Fast back to back transfers disabled
[    1.650127] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    1.656817] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x402fffff]
[    1.663636] pci 0001:01:00.0: BAR 2: assigned [mem 0x40000000-0x401fffff 64b]
[    1.670998] pci 0001:01:00.0: BAR 0: assigned [mem 0x40200000-0x40207fff 64b]
[    1.678354] pci 0001:00:00.0: PCI bridge to [bus 01]
[    1.683331] pci 0001:00:00.0:   bridge window [mem 0x40000000-0x402fffff]
[    1.690148] pci_bus 0001:00: resource 4 [mem 0x40000000-0x47ffffff]
[    1.696449] pci_bus 0001:01: resource 1 [mem 0x40000000-0x402fffff]
[    1.702789] pci 0001:00:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s )
[    1.711151] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ra:
[    1.718702] pcie_iproc_bcma bcma0:9:   No bus range found for /axi@18000000/]
[    1.728342] pcie_iproc_bcma bcma0:9: non-prefetchable memory resource requird
[    1.853924] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[    1.860125] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[    1.866517] gpio gpiochip0: Static allocation of GPIO base is deprecated, us.
[    1.876089] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 se)
[    1.885221] bcma-host-soc 18000000.axi: bus0: Bus registered
[    1.891401] pci 0000:00:00.0: enabling device (0140 -> 0142)
[    1.897156] bcma-pci-bridge 0000:01:00.0: enabling device (0140 -> 0142)
[    1.903942] bcma-pci-bridge 0000:01:00.0: bus1: Found chip with id 0x4352, r1
[    1.913133] bcma-pci-bridge 0000:01:00.0: bus1: Core 0 found: ChipCommon (ma)
[    1.923814] bcma-pci-bridge 0000:01:00.0: bus1: Core 1 found: IEEE 802.11 (m)
[    1.934576] bcma-pci-bridge 0000:01:00.0: bus1: Core 2 found: ARM CR4 (manuf)
[    1.944987] bcma-pci-bridge 0000:01:00.0: bus1: Core 3 found: PCIe Gen2 (man)
[    1.955558] bcma-pci-bridge 0000:01:00.0: bus1: Core 4 found: USB 2.0 Device)
[    2.000977] bcma-pci-bridge 0000:01:00.0: bus1: Bus registered
[    2.007320] NET: Registered PF_INET6 protocol family
[    2.014110] Segment Routing with IPv6
[    2.017832] In-situ OAM (IOAM) with IPv6
[    2.021860] NET: Registered PF_PACKET protocol family
[    2.027192] 8021q: 802.1Q VLAN Support v1.8
[    2.031461] Registering SWP/SWPB emulation handler
[    2.059606] b53-srab-switch 18007000.ethernet-switch: found switch: BCM530125
[    2.187644] b53-srab-switch 18007000.ethernet-switch: OF node /ethernet-swity
[    2.201490] b53-srab-switch 18007000.ethernet-switch: OF node /ethernet-swits
[    2.218019] b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB ca!
[    2.229563] b53-srab-switch 18007000.ethernet-switch lan1 (uninitialized): P)
[    2.243242] b53-srab-switch 18007000.ethernet-switch lan2 (uninitialized): P)
[    2.256866] b53-srab-switch 18007000.ethernet-switch lan3 (uninitialized): P)
[    2.270439] b53-srab-switch 18007000.ethernet-switch lan4 (uninitialized): P)
[    2.284016] b53-srab-switch 18007000.ethernet-switch wan (uninitialized): PH)
[    2.296094] bgmac_bcma bcma0:3 eth0: entered promiscuous mode
[    2.301906] DSA: tree 0 setup
[    2.305420] clk: Disabling unused clocks
[    2.316755] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
[    2.324891] Freeing unused kernel image (initmem) memory: 1024K
[    2.331038] Run /sbin/init as init process
[    2.877893] init: Console is alive
[    2.881524] init: - watchdog -
[    3.723274] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.779560] usbcore: registered new interface driver usbfs
[    3.785193] usbcore: registered new interface driver hub
[    3.790582] usbcore: registered new device driver usb
[    3.796645] gpio_button_hotplug: loading out-of-tree module taints kernel.
[    3.804278] gpio-keys gpio-keys: does not support key code:141
[    3.810145] gpio-keys: probe of gpio-keys failed with error -22
[    3.866138] kmodloader: done loading kernel modules from /etc/modules-boot.d*
[    3.883766] init: - preinit -
Could not open nvram! Possible reasons are:
        - No device found (/proc not mounted or no nvram present)
        - Insufficient permissions to open mtd device
        - Insufficient memory to complete operation
        - Memory mapping failed or not supported
        - Nvram magic not found in specific nvram partition
Could not open nvram! Possible reasons are:
        - No device found (/proc not mounted or no nvram present)
        - Insufficient permissions to open mtd device
        - Insufficient memory to complete operation
        - Memory mapping failed or not supported
        - Nvram magic not found in specific nvram partition
[    5.045801] b53-srab-switch 18007000.ethernet-switch lan1: configuring for pe
[    5.054471] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control f
[    5.064602] b53-srab-switch 18007000.ethernet-switch lan1: Link is Up - 1Gbpx
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
^[OP[    9.483325] mount_root: no usable overlay filesystem found, using tmpfs y
[    9.495589] urandom-seed: Seed file not found (/etc/urandom.seed)
[    9.664106] b53-srab-switch 18007000.ethernet-switch lan1: Link is Down
[    9.676905] procd: - early -
[    9.679940] procd: - watchdog -
[   10.258039] procd: - watchdog -
[   10.261860] procd: - ubus -
[   10.362588] procd: - init -
Please press Enter to activate this console.
[   10.977331] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.214348] Loading modules backported from Linux version v6.12.6-0-ge9d65b4a
[   11.221870] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
[   11.367609] urngd: v1.0.2 started.
[   11.561569] PPP generic driver version 2.4.2
[   11.584877] NET: Registered PF_PPPOX protocol family
[   11.598316] b43-phy0: Broadcom 4352 WLAN found (core revision 42)
[   11.623992] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), )
[   11.632050] b43: probe of bcma1:1 failed with error -95
[   11.637425] Broadcom 43xx driver loaded [ Features: NL ]
[   11.684765] usbcore: registered new interface driver brcmfmac
[   11.706305] kmodloader: done loading kernel modules from /etc/modules.d/*
[   21.524781] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.535087] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.553493] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.564230] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.574774] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.584407] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.595017] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.604992] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.614768] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.626919] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.636543] jffs2: Further such events for this erase block will not be prind
[   21.690368] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.699943] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.709873] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.719746] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.729526] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.739311] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.749083] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.758870] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.768620] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.778420] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.788007] jffs2: Further such events for this erase block will not be prind
[   21.829093] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.838712] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.848571] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.858323] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.868093] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.877848] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.887662] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.897420] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.907198] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.916955] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.926544] jffs2: Further such events for this erase block will not be prind
[   21.944546] jffs2: Old JFFS2 bitmask found at 0x0006429c
[   21.949893] jffs2: You cannot use older JFFS2 filesystems with newer kernels
[   21.980376] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.989958] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   21.999540] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   22.009476] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   22.019272] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   22.029099] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   22.038873] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   22.048669] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   22.058458] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   22.068230] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found ad
[   22.077817] jffs2: Further such events for this erase block will not be prind
[   22.118700] jffs2: Cowardly refusing to erase blocks on filesystem with no vs
[   22.127243] jffs2: empty_blocks 4, bad_blocks 0, c->nr_blocks 8
[   22.314142] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control f
[   22.334350] b53-srab-switch 18007000.ethernet-switch lan1: configuring for pe
[   22.346081] br-lan: port 1(lan1) entered blocking state
[   22.351358] br-lan: port 1(lan1) entered disabled state
[   22.356785] b53-srab-switch 18007000.ethernet-switch lan1: entered allmultice
[   22.364677] bgmac_bcma bcma0:3 eth0: entered allmulticast mode
[   22.404048] b53-srab-switch 18007000.ethernet-switch lan1: entered promiscuoe
[   22.498613] b53-srab-switch 18007000.ethernet-switch lan2: configuring for pe
[   22.509566] br-lan: port 2(lan2) entered blocking state
[   22.514953] br-lan: port 2(lan2) entered disabled state
[   22.520288] b53-srab-switch 18007000.ethernet-switch lan2: entered allmultice
[   22.528580] b53-srab-switch 18007000.ethernet-switch lan2: entered promiscuoe
[   22.601937] b53-srab-switch 18007000.ethernet-switch lan3: configuring for pe
[   22.612831] br-lan: port 3(lan3) entered blocking state
[   22.618168] br-lan: port 3(lan3) entered disabled state
[   22.623468] b53-srab-switch 18007000.ethernet-switch lan3: entered allmultice
[   22.631652] b53-srab-switch 18007000.ethernet-switch lan3: entered promiscuoe
[   22.705368] b53-srab-switch 18007000.ethernet-switch lan4: configuring for pe
[   22.716078] br-lan: port 4(lan4) entered blocking state
[   22.721341] br-lan: port 4(lan4) entered disabled state
[   22.726740] b53-srab-switch 18007000.ethernet-switch lan4: entered allmultice
[   22.735657] b53-srab-switch 18007000.ethernet-switch lan4: entered promiscuoe
[   22.803481] b53-srab-switch 18007000.ethernet-switch wan: configuring for phe
[   25.444707] b53-srab-switch 18007000.ethernet-switch lan1: Link is Up - 1Gbpx
[   25.453965] br-lan: port 1(lan1) entered blocking state
[   25.459381] br-lan: port 1(lan1) entered forwarding state
^CPlease press Enter to activate this console.
^CPlease press Enter to activate this console.

BusyBox v1.37.0 (2025-01-20 23:37:48 UTC) built-in shell (ash)

_______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r28646-42a253c7e8
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------

OpenWrt recently switched to the "apk" package manager!

OPKG Command           APK Equivalent      Description
 ------------------------------------------------------------------
 opkg install <pkg>     apk add <pkg>       Install a package
 opkg remove <pkg>      apk del <pkg>       Remove a package
 opkg upgrade           apk upgrade         Upgrade all packages
 opkg files <pkg>       apk info -L <pkg>   List package contents
 opkg list-installed    apk info            List installed packages
 opkg update            apk update          Update package lists
 opkg search <pkg>      apk search <pkg>    Search for packages
 ------------------------------------------------------------------

For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cht

root@OpenWrt:~# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 3.5M      3.5M         0 100% /rom
tmpfs                   248.7M    212.0K    248.5M   0% /tmp
tmpfs                   248.7M     36.0K    248.7M   0% /tmp/root
overlayfs:/tmp/root     248.7M     36.0K    248.7M   0% /
tmpfs                   512.0K         0    512.0K   0% /dev
root@OpenWrt:~#

Paste Settings

Paste Title : [Optional]

Paste Folder : [Optional]

Syntax Highlighting : [Optional]

Paste Expiration : [Optional]

Paste Status : [Optional]

Password : [Optional]

Description: [Optional]

Tags: [Optional]

Encrypt Paste (?)

You are currently not logged in, this means you can not edit or delete anything you paste. Sign Up or Login

Paste Settings

Site Languages