Loader:raw Filesys:raw Dev:flash0.runtime1 File: Options:(null) Loading: .... 3201120 bytes read Entry at 0x00008000 Closing network. Starting program at 0x00008000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.72 (kali@kali) (arm-openwrt-linux-muslgnueabi-5 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie [ 0.000000] OF: fdt: Machine model: Buffalo WXR-1900DHP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during . [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] HighMem [mem 0x0000000008000000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] node 0: [mem 0x0000000088000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000009fffffff] [ 0.000000] percpu: Embedded 12 pages/cpu s17620 r8192 d23340 u49152 [ 0.000000] Kernel command line: console=ttyS0,115200 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, l) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, lin) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130784 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 508256K/524288K available (7215K kernel code, 595K rwdat) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x0 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000002] sched_clock: 64 bits at 500MHz, resolution 2ns, wraps every 4398s [ 0.000022] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycls [ 0.000046] Switching to timer-based delay loop, resolution 2ns [ 0.000332] Calibrating delay loop (skipped), value calculated using timer f) [ 0.000346] CPU: Testing write buffer coherency: ok [ 0.000372] CPU0: Spectre v2: using BPIALL workaround [ 0.000378] pid_max: default: 32768 minimum: 301 [ 0.005966] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, line) [ 0.005979] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,) [ 0.011189] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012102] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adj. [ 0.012252] Setting up static identity map for 0x100000 - 0x10003c [ 0.012414] rcu: Hierarchical SRCU implementation. [ 0.012420] rcu: Max phase no-delay instances is 1000. [ 0.012806] smp: Bringing up secondary CPUs ... [ 0.013485] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013503] CPU1: Spectre v2: using BPIALL workaround [ 0.013601] smp: Brought up 1 node, 2 CPUs [ 0.013611] SMP: Total of 2 processors activated (2000.00 BogoMIPS). [ 0.013619] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primar) [ 0.013624] CPU: This may indicate a broken bootloader or firmware. [ 0.017534] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms [ 0.017559] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.020580] pinctrl core: initialized pinctrl subsystem [ 0.022385] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.023048] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.023865] thermal_sys: Registered thermal governor 'step_wise' [ 0.034040] clocksource: Switched to clocksource arm_global_timer [ 0.040495] NET: Registered PF_INET protocol family [ 0.040676] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linea) [ 0.041221] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096) [ 0.041247] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,) [ 0.041263] TCP established hash table entries: 1024 (order: 0, 4096 bytes, ) [ 0.041279] TCP bind hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.041309] TCP: Hash tables configured (established 1024 bind 1024) [ 0.041737] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linea) [ 0.041975] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.042004] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.042448] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.042486] PCI: CLS 0 bytes, default 64 [ 0.043826] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.045345] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.045363] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI. [ 0.046643] bounce: pool size: 64 pages [ 0.048590] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.049372] printk: console [ttyS0] disabled [ 0.049667] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 26, base_baud =0 [ 0.049717] printk: console [ttyS0] enabled [ 0.597400] bcm2835-rng 18004000.rng: hwrng registered [ 0.604565] nand: No NAND device found [ 0.608842] bcm_iproc 18029200.spi: using bspi-mspi mode [ 0.616793] spi-nor spi0.0: mx66l51235f (65536 Kbytes) [ 1.014064] random: crng init done [ 1.231717] 2 bcm47xxpart partitions found on MTD device spi0.0 [ 1.237673] Creating 2 MTD partitions on "spi0.0": [ 1.242492] 0x000000000000-0x000001fc0000 : "boot" [ 1.248039] 0x000001fc0000-0x000004000000 : "nvram" [ 1.256451] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered [ 1.264469] b53-srab-switch 18007000.ethernet-switch: found switch: BCM530125 [ 1.272448] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.279156] bcma-host-soc 18000000.axi: bus0: Found chip with id 53010, rev 0 [ 1.288191] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manu) [ 1.298848] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (ma) [ 1.309664] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF) [ 1.319713] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf ) [ 1.330204] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf ) [ 1.340682] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf ) [ 1.351177] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf ) [ 1.361579] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manu) [ 1.372169] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manu) [ 1.382779] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manu) [ 1.393425] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 c) [ 1.405528] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf ) [ 1.415983] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf ) [ 1.426441] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x) [ 1.436726] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4B) [ 1.446835] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 J) [ 1.458258] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR) [ 1.471066] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4B) [ 1.481196] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash cont) [ 1.492882] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash contr) [ 1.504337] bcma-host-soc 18000000.axi: bus0: Flash type not supported [ 1.513502] bgmac_bcma bcma0:3: Found PHY addr: 30 (NOREGS) [ 1.519168] bgmac_bcma bcma0:3: Support for Roboswitch not implemented [ 1.526724] b53-srab-switch b53-srab-switch: invalid resource (null) [ 1.533111] b53-srab-switch: probe of b53-srab-switch failed with error -22 [ 1.540785] bgmac_bcma bcma0:4: Found PHY addr: 0 [ 1.545583] bgmac_bcma bcma0:4: Support for Roboswitch not implemented [ 1.553567] bgmac_bcma bcma0:5: Found PHY addr: 0 [ 1.558377] bgmac_bcma bcma0:5: Support for Roboswitch not implemented [ 1.564976] bgmac_bcma bcma0:5: Invalid MAC addr: 00:00:00:00:00:00 [ 1.571272] bgmac_bcma bcma0:5: Using random MAC: a2:2a:48:f9:83:6b [ 1.579028] bgmac_bcma bcma0:6: Unsupported core_unit 3 [ 1.584356] bgmac_bcma: probe of bcma0:6 failed with error -524 [ 1.590468] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ra: [ 1.598038] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/] [ 1.607669] OF: /axi@18000000/pcie@12000: Missing device_type [ 1.613439] pcie_iproc_bcma bcma0:7: non-prefetchable memory resource requird [ 1.734032] pcie_iproc_bcma bcma0:7: PHY or data link is INACTIVE! [ 1.740238] pcie_iproc_bcma bcma0:7: no PCIe EP device detected [ 1.746322] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ra: [ 1.753834] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/] [ 1.763489] pcie_iproc_bcma bcma0:8: non-prefetchable memory resource requird [ 1.884029] pcie_iproc_bcma bcma0:8: PHY or data link is INACTIVE! [ 1.890234] pcie_iproc_bcma bcma0:8: no PCIe EP device detected [ 1.896308] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ra: [ 1.903822] pcie_iproc_bcma bcma0:9: No bus range found for /axi@18000000/] [ 1.913473] pcie_iproc_bcma bcma0:9: non-prefetchable memory resource requird [ 2.034031] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE! [ 2.040230] pcie_iproc_bcma bcma0:9: no PCIe EP device detected [ 2.046612] gpio gpiochip0: Static allocation of GPIO base is deprecated, us. [ 2.056197] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 se) [ 2.065325] bcma-host-soc 18000000.axi: bus0: Bus registered [ 2.071707] NET: Registered PF_INET6 protocol family [ 2.078240] Segment Routing with IPv6 [ 2.081954] In-situ OAM (IOAM) with IPv6 [ 2.086034] NET: Registered PF_PACKET protocol family [ 2.091385] 8021q: 802.1Q VLAN Support v1.8 [ 2.095690] Registering SWP/SWPB emulation handler [ 2.118513] b53-srab-switch 18007000.ethernet-switch: found switch: BCM530125 [ 2.247745] b53-srab-switch 18007000.ethernet-switch: OF node /ethernet-swity [ 2.261592] b53-srab-switch 18007000.ethernet-switch: OF node /ethernet-swits [ 2.278121] b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB ca! [ 2.289661] b53-srab-switch 18007000.ethernet-switch lan1 (uninitialized): P) [ 2.303446] b53-srab-switch 18007000.ethernet-switch lan2 (uninitialized): P) [ 2.317189] b53-srab-switch 18007000.ethernet-switch lan3 (uninitialized): P) [ 2.330944] b53-srab-switch 18007000.ethernet-switch lan4 (uninitialized): P) [ 2.344709] b53-srab-switch 18007000.ethernet-switch wan (uninitialized): PH) [ 2.356845] bgmac_bcma bcma0:3 eth0: entered promiscuous mode [ 2.362662] DSA: tree 0 setup [ 2.366317] clk: Disabling unused clocks [ 2.370751] /dev/root: Can't open blockdev [ 2.374927] VFS: Cannot open root device "" or unknown-block(0,0): error -6 [ 2.381913] Please append a correct "root=" boot option; here are the availa: [ 2.390321] 1f00 32512 mtdblock0 [ 2.390329] (driver?) [ 2.396896] 1f01 33024 mtdblock1 [ 2.396903] (driver?) [ 2.403456] List of all bdev filesystems: [ 2.407491] squashfs [ 2.407495] [ 2.411265] Kernel panic - not syncing: VFS: Unable to mount root fs on unkn) [ 2.419553] CPU1: stopping [ 2.419560] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.72 #0 [ 2.419569] Hardware name: BCM5301X [ 2.419580] unwind_backtrace from show_stack+0x10/0x20 [ 2.419609] show_stack from dump_stack_lvl+0x40/0x4c [ 2.419630] dump_stack_lvl from do_handle_IPI+0xec/0x120 [ 2.419648] do_handle_IPI from ipi_handler+0x18/0x20 [ 2.419667] ipi_handler from handle_percpu_devid_irq+0x78/0x140 [ 2.419698] handle_percpu_devid_irq from generic_handle_domain_irq+0x28/0x40 [ 2.419715] generic_handle_domain_irq from gic_handle_irq+0x74/0x88 [ 2.419726] gic_handle_irq from generic_handle_arch_irq+0x34/0x60 [ 2.419741] generic_handle_arch_irq from call_with_stack+0x18/0x20 [ 2.419771] call_with_stack from __irq_svc+0x80/0x98 [ 2.419786] Exception stack(0xc107df70 to 0xc107dfb8) [ 2.419795] df60: 00000003 00000001 00000 [ 2.419803] df80: c0b09f68 00000001 c1044380 c0b09fa4 0000406a 413fc090 00000 [ 2.419809] dfa0: c1040038 c107dfc0 c08042e4 c080478c 60000013 ffffffff [ 2.419814] __irq_svc from default_idle_call+0x2c/0x30 [ 2.419827] default_idle_call from do_idle+0x90/0x100 [ 2.419854] do_idle from cpu_startup_entry+0x28/0x40 [ 2.419872] cpu_startup_entry from secondary_start_kernel+0x11c/0x120 [ 2.419893] secondary_start_kernel from 0x1012b4 [ 2.544572] Rebooting in 1 seconds..